Skip to content
My Door Factory

MDF Cabinet Door Construction And Finishes

Choose the door style, then decide which finishing stages you want included. My Door Factory supplies fully sanded MDF cabinet doors with raw, primed or painted options. Construction availability depends on the model, and our team confirms the specification with your quote.

Compare Raw, Primed And Painted Doors

Use the comparison below to decide what to request. If you are unsure, select Not Sure in the quote builder and tell the team what you want to achieve.

Raw MDF Doors
Fully sanded doors without primer or a painted finish, for shops planning to apply their own coating system.
Primed MDF Doors
Request the priming stage before your shop applies its final finish. The team confirms the coating details and additional time.
Painted MDF Doors
Request a painted finish in one of our six standard colours, or provide any Benjamin Moore colour code. You can also choose Help Me Choose. Our team confirms the finish and schedule.

Raw MDF Doors For Your Shop's Finishing Process

Raw doors arrive fully sanded and without primer or top coat. Share your intended coating process when requesting a quote so the team can discuss the preparation and finish requirements for your project. Do not assume that one coating specification applies to every job.

Primed MDF Doors

Choose primed when you want the priming stage included. Tell us which final coating your shop plans to use so the team can confirm the details before you approve the quote. Primer adds time to the standard production schedule.

Painted MDF Doors

Choose painted when you want a painted finish included in your quote. Select a standard colour, enter a Benjamin Moore colour code, or choose Help Me Choose. Top coat adds production time; the final quote confirms the finish and schedule.

One-Piece And Two-Piece Construction

Construction availability depends on the style. In two-piece construction, a pocket is cut through the door and another piece of MDF is glued in. This provides a raw, tempered face that is easier to paint, with less chance of fibres pulling than on a pocketed face. Each door page lists whether one-piece, two-piece or both are available. Choose Not Sure in the quote builder if you would like help.

Confirm Sizes And Frame Details

The minimum thickness is 3/4 inch (approximately 19 mm), and the maximum size is 5 × 10 feet. These limits apply across the door range. Include finished width, height, units and quantity in your request. Confirm stile and rail widths and small-door profile details with the team before ordering. Photos and technical profiles do not replace the approved order specification.

Door Back Options

Raw and white-melamine backs are available. Ask the team to confirm the back option for your selected style and construction.

Matching Drawer Fronts

Matching drawer fronts and reduced-rail drawer fronts are available. Most reduced-rail fronts match the door style, but some styles cannot be matched exactly. The team matches the inside profile as closely as possible and confirms the details for your order.

Glass-Ready Frames

Glass-ready doors are supplied as frames only. A pocket in the back receives the customer's glass panel, with more squared-off corners to accommodate the glass. A retainer slot is available for a rubber gasket that holds the glass in place. My Door Factory does not supply glass, hinges, handles, knobs or other hardware. Confirm the frame and retainer-slot requirements with the team.

Drilling And Milling

Holes for hinges and bumpers are available. Drilling for handles and knobs can also be requested. Supply the required hole sizes and positions, or a drawing, so the team can confirm the work.

Request A Finish Sample

Samples are usually free, with shipping costs depending on distance. Raw, primed and fully finished samples are available; provide a Benjamin Moore colour code when requesting a painted finish. Contact the team to confirm your sample request and any charges.

Production, Delivery And Pickup

Standard production is five business days after final quote approval. Primer or top coat adds time. Delivery and pickup are arranged separately. We manufacture in St. Thomas and deliver within 150 km of our St. Thomas shop, with service availability confirmed for your address.

CallStart A Quote

Get The Free Catalog

No payment required. This request does not subscribe you to a newsletter.